How to Choose Reflective Glass for Size, Color and Use

Start with the project requirement

Reflective glass has a thin metallic coating on one side. The coating gives the sheet its mirrored appearance and supports uses where glare, sunlight and sightlines need attention. Commercial facades, windows and curtain walls use it for exterior appearance, privacy and solar control. Residential windows, doors and partitions use it when privacy and reduced heat are part of the design brief.

Security and surveillance spaces can use the one-way mirror effect for controlled visibility. Automotive mirrors and windows are also listed applications. For these projects, the component shape, sheet thickness and secondary processing should be settled before production.

The best fit depends on what the room or elevation needs to achieve. A facade project should begin with the panel grid and exterior color. A residential partition should begin with the frame opening and privacy requirement. A surveillance room should begin with the viewing direction and lighting arrangement.

Match thickness to the glazing build-up

We supply hot thicknesses of 4 mm, 5 mm, 5.5 mm, 6 mm, 8 mm and 10 mm, with other thicknesses available within the product range. Select thickness with the planned assembly and fabrication route in view. A single-glazed panel, laminated piece and insulating glass unit have different build-up requirements.

The glass can be cut, bent, drilled, tempered, heat strengthened and laminated. If the project includes drilled holes, send the hole locations and edge distances with the drawing. If it includes bending or thermal treatment, send the finished shape and treatment route before the sheet is cut.

For a large facade, thickness also connects to panel size and support details. For an interior partition, the frame opening and edge treatment affect the usable cut size. Send the assembly drawing with the inquiry so we can review the glass as part of the complete build-up.

Plan the sheet size around the finished panels

The hot sheet range includes large formats up to 3660 × 2440 mm and smaller formats beginning at 1650 × 2140 mm. These dimensions affect the cutting plan, joints, handling route and number of finished panels.

For a curtain wall, compare the sheet format with the elevation grid and the largest panel that can move through the workshop. For a door or partition, compare the cut size with the clear frame opening, unloading point and access route. A nominal hot size is only the starting point. The quote request should contain the finished cut list and quantity.

A project using large facade panels may need the 3660 mm length and 2440 mm width considered during handling and cutting. A smaller interior panel may suit a 1650 mm or 1830 mm width. Confirm the cutting pattern before selecting the sheet format.

Choose color for the elevation and interior

Our color range includes clear, bronze, grey, green, blue and pink options. The named choices are Clear, Euro Bronze, Golden Bronze, Mist Grey, Euro Grey, Dark Grey, French Green, Dark Green, Lake Blue, Dark Blue, Royal Blue and Pink.

Color changes the character of a facade and the way the reflective surface is perceived. Use the elevation, interior palette or vehicle design to narrow the choice. For adjacent panels, include a color reference and required quantity in the inquiry so the order can be planned consistently.

Review color in the surrounding light when the appearance is important. A commercial frontage may call for a stronger mirrored tone, while a residential project may prioritize a softer match with the building palette. A physical sample or approved color reference is useful when the glass must align with a drawing or an existing installation.

Fix the coating position and processing route

For single glazing, install the coating face toward the inside. Put this orientation in the glazing schedule and installation instructions so the sheet is placed correctly after delivery.

The coating is produced with CVD technology, which creates a uniform metal oxide layer chemically bonded to the glass. The hard layer permits cutting, bending, drilling, tempering and heat strengthening without affecting the coating. The glass can also be used in laminated configurations. On-line LVC reflective glass can be bent or tempered after manufacture.

The fabrication route should be fixed before ordering. A laminated or insulating unit should be specified as an assembly, including the intended reflective-surface position. A drilled panel needs hole locations, edge distances and finished dimensions. A bent or tempered panel needs its final shape and treatment requirements.

Match the product to the working situation

For a commercial facade or curtain wall, choose the color and sheet format against the elevation grid, then match thickness and processing to the panel design. This is the suitable choice when the project needs a reflective exterior, solar control and reduced glare.

For a residential window, door or partition, prioritize privacy, color, frame opening and access route. Measure the opening and handling path before selecting a large hot format. For a security or surveillance room, review the viewing direction and lighting arrangement with the one-way mirror requirement.

Automotive mirror and window projects should send the component shape and processing requirements with the inquiry. We can then match the sheet specification to the intended fabrication route.

Specific questions before the order

Send a complete glass schedule

Reflective Glass fits commercial facades, residential glazing, partitions, automotive applications and controlled-visibility rooms when the color, assembly and fabrication route suit the project. We recommend sending finished cut sizes, thickness, color, quantity, glazing configuration, processing operations, coating orientation and any drawings with your quotation request.